Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
MEASUrement:
REFLevels:PERCent:RISELow
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the low reference level of the rising edge
when the meas
urement's ref level method is set to percent.
Group
Measurement
Syntax
MEASUrement:REFLevels:PERC ent:RISELow <NR3>
MEASUreme
nt:REFLevels:PERCent:RISEL ow?
Arguments
<NR3> is the percentage u sed to calculate the low reference level of the rising edge.
Examples
MEASUrement:REFLevels:PERC ent:RISELow 10 sets the low reference level
to 10%.
MEASUrement:REFLevels:PERC ent:RISELow? might return
:MEASUREMENT:REFLEVELS:PER CENT:RISELOW 20.0000 indicating the low
reference level is 20%.
MEASUrement:REFLevels:PERCent:RISEMid
This command sets or queries the percentage (where 100% is equal to TOP and
0% i
s equal to BASE) used to calculate the mid reference level of the rising edge
when the measurement's ref level method is set to percent.
Group
Measurement
Syntax
MEASUrement:REFLevels:PERC ent:RISEMid <NR3>
MEASUrement:REFLevels:PERC ent:RISEMid?
Arguments
<NR3> is the percentage used to calculate the mid reference level of the rising
edge.
Examples
MEASUrement:REFLevels:PERC ent:RISEMid 55 sets the mid reference
level to 55%.
MEASUrement:REFLevels:PERC ent:RISEMid? might return
:MEASUREMENT:REFLEVELS:PER CENT:RISEMID 50.0000 indicating the mid
reference level is 50%.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-505

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English