Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
DISplay:MATHF
FTView1:CURSor:SCREEN:BYPOSi tion?
might
return
:DISPLAY:MATHFFTVIEW1:CURSOR :SCREEN:BYPOSITION
-59.0460929065173
indicating the cursor position is at -59.0 d Bm.
DISplay:MATHFFTView<x>:CURSor:STATE
This command sets or queries the visible state of the specified cursor in the
specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CU RSor:STATE
DISplay:MATHFFTView<x>:CU RSor:STATE?
Arguments
OFF turns off the cursor.
ON displays the cursor.
<NR1> = 0 turns off the cursor; any other value displalys the cursor.
Examples
DISplay:MATHFFTView1:CURS or:STATE OFF turns off the cursor.
DISplay:MATHFFTView1:CURS or:STATE? might return
:DISPLAY:MATHFFTVIEW1:CUR SOR:STATE 1 indicating the cursor
is displayed.
DISplay:MATHFFTView<x>:CURSor:VBArs:APOSition
This command sets or queries the horizontal cursor A position of the specified
cursor in th
especifi ed view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CU RSor:VBArs:APOSition <NR3 >
DISplay:MATHFFTView<x>:CU RSor:VBArs:APOSition?
Arguments
<NR3> is the horizontal cursor A position of the specified cursor in the specified
view.
Examples
DISplay:MATHFFTView1:CURS or:VBArs:APOSition 500.0e 6 sets the
cursor position to 500 MHz.
2-240 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English