Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Examples
SEARCH:SEARCH
1:TRIGger:A:TRANsition:SOUrc e CH1
sets the source
to channel 1.
SEARCH:SEARC
H1:TRIGger:A:TRANsition:SO Urce
? might return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:SOURCE CH2 indicating
channel 2 is the source.
SEARCH:SEA
RCH<x>:TRIGger:A:TRANsition:THReshold:HIGH
Sets or queries the source threshold HIGH level for a transition trigger search to
determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:HIGH <NR3>
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:HIGH?
Arguments
<NR3> the source threshold HIGH level for a transition trigger search.
Examples
SEARCH:SEARCH1:TRIGger:A:T RANsition:THReshold:HIGH 50.0e-3
sets the high threshold to 50.0 mV.
SEARCH:SEARCH1:TRIGger:A:T RANsition:THReshold:HIGH? might return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH 0.0E+0
indicating the high threshold is 0.0 V.
SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW
Sets or queries the source threshold LOW level for a transition trigger search to
determine where to place a mark. The search number is specified by <x>. .
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:LOW <NR3>
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:LOW?
Arguments
<NR3> is the source threshold LOW level for a transition trigger searchk.
Examples
SEARCH:SEARCH1:TRIGger:A:T RANsition:THReshold:LOW - 50.0e-3
sets the LOW threshold to -50.0 mV.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-743

Tektronix MSO54 Specifications

General

Analog Channels	4
Sample Rate	6.25 GS/s
Vertical Resolution	12-bit
Form Factor	Benchtop
Probe Interface	TekVPI
Operating Temperature	0 °C to +50 °C
Bandwidth	1 GHz
Record Length	62.5 Mpoints
Display	15.6 inch HD
Waveform Update Rate	>500, 000 wfms/s
Trigger Types	Edge, Pulse, Runt, Logic, Serial
Serial Bus Support	I2C, SPI, RS-232/422/485/UART, CAN/CAN FD/LIN, USB 2.0, Ethernet
Connectivity	USB, Ethernet
Input Impedance	1 MΩ
Power Requirements	100-240 VAC, 50/60 Hz
Maximum Input Voltage	400 V (DC + peak AC)