To Next Page

To Previous Page

Commands listed in alphabetical order

Examples

CH4:TERMINATI

ON 50.0E+0

establishes 50 Ω impedance on Channel 1.

CH2:TERMINATION? might return :CH2:TER MINATION 50.0E+0, indicating

that Channel 2 is set to 5 0 Ω impedance.

CH<x>_DALL:LABel:COLor

This command sets or que ries the color of the speciﬁ ed digital group label. The

channel is speciﬁed by x.

Group

Digital

Syntax

CH<x>_DALL:LABel:COLor <QString>

Arguments

<QString> is the color of the d igital group label. To return the color to the default

color, send an empty string as in this example:

:CH5_DALL:LABEL:COLOR "".

Examples

CH1_DALL:LABel:COLor "#FF0000" sets the font color to red.

CH1_DALL:LABel:COLor? might return :CH1_DALL:LABEL:COLOR

"#FFFF00"

indicating the font color is yellow.

CH<x>_DALL:LABel:FONT:BOLD

This command sets or queries the bold state of the speciﬁed digital group. The

channel is speciﬁed by x.

Group

Digital

Syntax

CH<x>_DALL:LABel:FONT:BOLD {ON|OFF|<NR 1>}

Arguments

OFF argument turns off bold font.

ON argument turns on bold font.

<NR1> = 0 turns off bold font; any other value turns on bold font.

Examples

CH1_DALL:LABel:FONT:BOLD ON sets the font to bold.

CH1_DALL:LABel:FONT:BOLD? might return :CH1_D ALL:LABEL:FONT:BOLD

indicating the font is not bold.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-205

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54