To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:M

EAS2:BURSTEDGTYPe?

might return

:MEASUREMENT:MEAS2:BURSTE DGTYPE RISE indicating a burst

with a rising edge.

MEASUrement

:MEAS<x>:CCRESUlts:ALLAcqs:MAXimum? (Query Only)

This query-only command returns the maximum cycle-cycle value for the

speciﬁed measurement for all acquisitions. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:CCRES Ults:ALLAcqs:MAXimum?

Returns

The maximum cycle-cycle statistic value for the speciﬁed measurement for all

acquisitions.

Examples

MEASUrement:MEAS2:CCRESUl ts:ALLAcqs:MAXimum? might return

:MEASUREMENT:MEAS2:CCRESU LTS:ALLACQS:MAXIMUM 9.91E +37.

MEASUrement:MEAS<x>:CCRESUlts:ALLAcqs:MEAN? (Query Only)

This query-only command returns the mean cycle-cycle value for the speciﬁed

measurement for all acquisitions. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:CCRES Ults:ALLAcqs:MEAN?

Returns

The mean cycle-cycle statistic value for the speciﬁed measurement for all

acquisitions.

Examples

MEASUrement:MEAS2CCRESUlt s:ALLAcqs:MEAN? might return

:MEASUREMENT:MEAS2:CCRESU LTS:ALLACQS:MEAN 9.91E+37.

MEASUrement:MEAS<x>:CCRESUlts:ALLAcqs:MINimum? (Query Only)

This query-only command returns the minimum cycle-cycle value for the speciﬁed

measurement for all acquisitions. Measurements are speciﬁed by x.

2-426 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54