Commands listed in alphabetical order
RECAll:SESsi
on (No Query Form)
Restores the state of the instrument, including reference waveforms, from a
saved session file.
Group
Save and Recall
Syntax
RECAll:SESsion <file path>
Arguments
<file p ath> is the fi le path that specifies the location of the specified instrument
session file.
If a file name or path is specified, the file is expected to be located in a directory
relative to the current working directory (specifi ed by FILESystem:CWD)unless
acompletepathisspecified:
Complete path specification. If the file argument begins with a drive
designator (such as C), then the file name is interpreted as a full path.
Relative path specification. If the file argument begins with "." or ".." or has a
file path separator appearing anywhere other than the first character position,
then the file name is treated as a path that is relative to the current working
directory.
Returns
Recalls the instrument session from the specified session file.
Examples
RECALL:SESSION "TEK00000.TSS" recalls the setup from the file
TEK00000.TSS in the current working directory.
RECAll:SETUp (No Query Form)
This command (no query form) returns stored or factory settings to the instrument
from a copy of the settings stored in memory. This command performs the same
function as selecting Recall from the File menu, and then choosing the Setup
button.
Group
Save and Recall
Syntax
RECAll:SETUp {FACtory|<file path>}
Related Commands
FACtory, *RST
2-598 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
