To Next Page

To Previous Page

Commands listed in alphabetical order

Syntax

BUS:B<x>:ETHE

Rnet:SOUrce {CH<x>|MATH<x>|REF<x>}

BUS:B<x>:ETHERnet:SOUrce?

Related Commands

BUS:B<x>:ETHERnet:THRESHold

Arguments

CH<x> speciﬁes to use one of the a nalog channels as the Ethernet data source

for d ifferential input.

MATH<x> speciﬁes to use a math waveform as the source for Ethernet data

differential input

REF<x> speciﬁes to use one of the reference waveforms as the Ethernet data

source for differential input.

Examples

BUS:B1:ETHERNET:SOURCE CH4 speciﬁes to use the channel 4 waveform as

the source for Ethernet data.

BUS:B1:ETHERNET:SOURCE? might return CH2, indicating that channel 2 is the

currently speciﬁed source for Ethernet data.

S:B<x>:ETHERNET:SOUrce:DMINus

This command sets or queries the Ethernet D- source for the speciﬁed bus. this

command speciﬁes the source channel to use when thesignaltypeissingleended.

he bus is speciﬁed by x.

Group

Bus

Syntax

BUS:B<x>:ETHERNET:SOUrce:D MINus {CH<x>|MATH<x>|REF< x>}

BUS:B<x>:ETHERNET:SOUrce:D MINus?

Arguments

Argument is the D- source.

Examples

BUS:B1:ETHERNET:SOUrce:DMI Nus CH1 sets the D- source to channel 1.

BUS:B1:ETHERNET:SOUrce:DMI Nus? might return

:BUS:B1:ETHERNET:SOURCE:DM INUS CH2 indicating the D- source is s et t o

channel 2.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-137

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54