Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:ETHERnet:TCPHeader:
SOUrceport:VALue <QString>
SEARCH:SEARCH<x>:TRIGger: A:BUS:ETHERnet:TCPHeader:
SOUrceport:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition
Arguments
<QString> is a quoted string of up to 1 6 characters where the allowable
characters are 0, 1, and X. The bits specified in the quoted string replace the least
significant bits, leaving any unspecified upper bits unchanged.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:ETHERNET:TCPHEADER:
SOURCEPORT:VALUE "XXXX0000 10100110"
specifies to use the value of
hexadecimal X0A6 when searching on the Ethernet TCP header source port
number.
SEARCH:SEARCH1:TRIGGER:A: BUS:ETHERNET:TCPHEADER:
SOURCEPORT:VALUE?
might return "XXXXX01001010110", indicating that
hexadecimal X0A6
has been specified as the value to use when searching on the
Ethernet TCP header source port number.
SEARCH:SEA
RCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition
This command sets or queries the FlexRay bus search condition. The search
number is specified by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:
FLEXRAY:CONDition {SOF|FRAMEType|
IDentifier|CYCLEcount|HEA Der|DATA|IDANDDATA|EOF|ERRor}
SEARCH:SEARCH<x>:TRIGger: A:BUS:FLEXRAY:CONDition?
Arguments
Arguments are the available trigger conditions.
Examples
SEARCH:SEARCH1:TRIGger:A: BUS:FLEXRAY:CONDition SOF sets the
trigger condition to start of frame.
2-662 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English