Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
TRIGGER:B:RES
ET:EDGE:SLOPE
? might return
:
TRIGGER:B:RESET:EDGE:SLOPE RISE indicating the instrument is set to reset
the trigger on the rising or positive e dge of a signal.
TRIGger:B:R
ESET:EDGE:SOUrce
This command sets or queries the trigger source for the A→B sequential edge
trigger reset feature.
Group
Trigger
Syntax
TRIGger:B:RESET:EDGE:SOUrc e {CH<x>|CH<x>_D<y>}
TRIGger:B:RESET:EDGE:SOUrc e?
Arguments
The source channel for the trigger reset.
Examples
TRIGGER:B:RESET:EDGE:SOURC E CH4 sets Channel 4 as the input source for
the trigger reset.
TRIGGER:B:RESET:EDGE:SOURC E? might return
:TRIGGER:B:RESET:EDGE:SOUR CE CH1, indicating that the current input
source for the trigger reset is Channel 1.
TRIGger:B:RESET:TIMEOut:TIMe
This command sets or queries the reset timer for a sequential timeout trigger reset.
Group
Trigger
Syntax
TRIGger:B:RESET:TIMEOut:TI Me <NR3>
TRIGger:B:RESET:TIMEOut:TI Me?
Arguments
<NR3> is the reset timer for a sequential timeout trigger reset.
Examples
TRIGGER:B:RESET:TIMEOUT:TI ME 100e-9 sets the time to 100 ns.
TRIGGER:B:RESET:TIMEOUT:TI ME? might return
:TRIGGER:B:RESET:TIMEOUT:TIME 20.0E-9 indicating the timeout time
issetto20ns.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-881

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English