To Next Page

To Previous Page

Commands listed in alphabetical order

MATH:MATH<x>

:SPECTral:TYPE

This command sets or queries the FFT type selected for spectral analysis. The

math waveform is speciﬁed by x.

Group

Math

Syntax

MATH:MATH<x>:SPECTral:TYP E {MAGNitude|PHASe|REAL|IMAG inary}

MATH:MATH<x>:SPECTral:TYP E?

Arguments

MAGNitude speciﬁes the magnitude spectral function.

PHASe speciﬁes the phase spectral function.

REAL speci ﬁes the real spectral function.

IMAGinary speciﬁes the imaginary spectral function.

Examples

MATH:MATH1:SPECTral:TYPE REAL speciﬁes the real spectral function.

MATH:MATH1:SPECTral:TYPE? might return :MATH:MATH1:SPECTRAL:TYPE

MAGNITUDE

indicating the math is the magnitude spectral function.

MATH:MATH<x>:SPECTral:UNWRap

This command sets or queries whether phase unwrap of the spectral analyzer

output data is enabled. The Math waveform is speciﬁed by x.

Group

Math

Syntax

MATH:MATH<x>:SPECTral:UNW Rap {OFF|ON|0|1}

MATH:MATH<x>:SPECTral:UNW Rap?

Arguments

0 disables phase unwrap for the speciﬁed math waveform.

1 enables phase unwrap for the speciﬁed math waveform.

ON enables phase unwrap for the speciﬁed math waveform.

OFF disables phase unwrap for the spec iﬁed math waveform.

Examples

MATH1:SPECTRAL:UNWRAP ON enables phase unwrap of the spectral a

nalyzer

output data.

2-376 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54