Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:WAVEform:APOSition <NR3>
DISplay:REFFFTView<x>:CUR Sor:WAVEform:APOSition?
Arguments
<NR3> is the waveform cursor A position in the specified plot view.
Examples
DISplay:REFFFTView5:CURSo r:WAVEform:APOSition 7E+5 sets the
position to 700 kHz.
DISplay:REFFFTView5:CURSo r:WAVEform:APOSition? might
return
:DISPLAY:REFFFTVIEW5:CURSOR: WAVEFORM:APOSITION
792.4465962305570E+3
indicating the A cursor waveform position is 792.4
kHz.
DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? (Query Only)
This query-only command returns the value of the cursor A vertical position.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:WAVEform:AVPOSition?
Examples
DISplay:REFFFTView<x>:CUR Sor:WAVEform:AVPOSition? might return
:DISplay:REFFFTView1:CURS or:WAVEform:AVPOSition 1. 605E+0
indicating the cursor vertical position is 1.6 dBm.
DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? (Query Only)
This query-only command returns the value of the cursor B horizontal position.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:WAVEform:BHPOSition?
Examples
DISplay:REFFFTView<x>:CUR Sor:WAVEform:BHPOSition? might return
:DISPLAY:REFFFTVIEW1:CURS OR:WAVEFORM:BHPOSITION 9. 91E+37.
2-274 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English