Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Conditions
Requires the SR
-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:LIN:DATa:QUALifier
{EQual|LESSEQual|MOREEQual |UNEQual|LESSthan|MOREthan|
INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGger:A :BUS:LIN:DATa:QUALifier?
Arguments
Argumentsaretheavailabledataqualifiers.
Examples
SEARCH:SEARCH2:TRIGger:A:B US:LIN:DATa:QUALifier LES S sets the
data qualifier to less than.
SEARCH:SEARCH1:TRIGger:A:B US:LIN:DATa:QUALifier? might return
:SEARCH:SEARCH1:TRIGGER:A: BUS:LIN:DATA:QUALIFIER EQ UAL,
indicating the data qualifier is equal.
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe
This command sets or queries the length of the stat string in bytes used for a LIN
bus search. The search number is specified by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:LIN:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger:A :BUS:LIN:DATa:SIZe?
Arguments
<NR1> specifies the data size.
Examples
SEARCH:SEARCH1:TRIGger:A:B US:LIN:DATa:SIZe 1.0 sets the data size
to 1.
SEARCH:SEARCH1:TRIGger:A:B US:LIN:DATa:SIZe? might return
:SEARCH:SEARCH1:TRIGGER:A: BUS:LIN:DATA:SIZE 1, indicating the data
size is 1.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-679

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English