Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Examples
DISplay:MATHF
FTView1:GRIDlines VERTICAL
specifies vertical grid lines.
DISplay:MATHFFTView1:GRID lines? might return
:DISPLAY:MAT
HFFTVIEW1:GRIDLINES BOTH
indicating both
horizontal and vertical grid lines are displayed.
DISplay:MATHFFTView<x>:MATH:MATH<x>:STATE
This command sets or queries the state of the specified math waveform in the
specified waveview.
Group
Display Control
Syntax
DISplay:MATHFFTView<x>:MA TH:MATH<x>:STATE {OFF|ON|<NR 1>}
Arguments
OFF disables the specified math.
ON enables the specified math.
<NR1> = 0 disables the specified math; any other value enables the specified math.
Examples
DISplay:MATHFFTView1:MATH :MATH1:STATE ON enables the specified math.
DISplay:MATHFFTView1:MATH :MATH1:STATE? might return
:DISPLAY:MATHFFTVIEW1:MAT H:MATH1:STATE 1 indicating the specified
math waveform in the specified waveview is displayed.
DISplay:MATHFFTView<x>:XAXIS:SCALE
This command sets or queries the x-axis scale setting for FFT Math waveforms,
either Linear or Log.
Group
Display Control
Syntax
DISplay:MATHFFTView<x>:XA XIS:SCALE {LINEAr|LOG}
DISplay:MATHFFTView<x>:XA XIS:SCALE?
Arguments
LINEAr specifies a linear scale.
LOG specifies a logarithmic scale.
2-244 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English