Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Syntax
BUS:B<x>:AUDi
o:DATa:SOUrce
{CH<x>|CH<x>_D<x>|MATH<x> |REF<x>|REF<x>_D<x>}
BUS:B<x>:AUDio:DATa:SOUrc e?
Arguments
CH<x> specifies an analog channel as the data source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the data source waveform for the
audio bus.
MATH<x> specifies an math wave form as the data source waveform for the audio
bus.
REF<x> specifies an reference waveform as the data source waveform for the
audio bus.
REF<x>_D<x> specifies a digital reference waveform as the data source wave form
for the specified audio bus.
Examples
BUS:B1:AUDIO:DATA:SOURCE CH1_D1 sets the data source to D1 of
FlexChannel 1.
BUS:B1:AUDIO:DATA:SOURCE? might return :BUS:B1:AUDIO:DATA:SOURCE
CH3
indicating that the data source is set to CH3.
BUS:B<x>:AUDio:DATa:THReshold
This command sets or queries the audio data source threshold for the specified
bus. The bus is specified by x.
Conditions
Requires option S R-AUDIO.
Group
Bus
Syntax
BUS:B<x>:AUDio:DATa:THRes hold <NR3>
BUS:B<x>:AUDio:DATa:THRes hold?
Related Commands
BUS:B<x>:AUDio:DATa:SOUrce
Arguments
<NR3> is the a udio data source threshold for the specified bus.
Examples
BUS:B3:AUDIO:DATA:THRESHO LD 1.5 sets the Bus 3 audio clock source
thresholdto500.0mV.
2-122 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English