Commands listed in alphabetical order
Examples
MEASUrement:M
EAS1:FILTers:RAMPtime 1.5
sets the ramp time to 1.5.
MEASUrement:MEAS1:FILTers: RAMPtime? might return
:MEASUREMENT
:MEAS1:FILTERS:RAMPTIME 2.0000
indicating the ramp
time is 2.0.
MEASUrement:MEAS<x>:FROMedge
This command sets or queries the from edge type for the measurement.
Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:FROMed ge {RISe|FALL|BOTH}
MEASUrement:MEAS<x>:FROMed ge?
Argument
s
FALL specifies the falling edge of the waveform.
RISE specifies the rising edge of the waveform.
BOTH specifies both the rising and falling edges of the waveform.
Examples
MEASUrement:MEAS1:FROMedge RISE specifies the rising edge of the
waveform.
MEASUrement:MEAS1:FROMedge ? might return
:MEASUREMENT:MEAS1:FROMEDG E BOTH indicating both the rising and falling
edges of the waveform.
MEASUrement:MEAS<x>:FROMEDGESEARCHDIRect
This command sets or queries the from edge search direction for the measurement.
Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:FROMED GESEARCHDIRect {FORWard|BACK Ward}
MEASUrement:MEAS<x>:FROMED GESEARCHDIRect?
Argume
nts
FORWard specifies a forward search from the edge.
BACKWard specifies a backward search from the edge.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-451
To Next Page
Loading...
Need help?
General
