Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
TXRX sets the Fl
exRaysignaltypetoTXRX.
Examples
BUS:B1:FLEXRAY:SIGNAL BM sets the FlexRay channel type to BM.
BUS:B1:FLEXRAY:SIGNAL? might return :BUS:B1:FLEXRAY :SIGNAL
BDIFFBP
, indicating the FlexRay channel type is set to BDIFFBP.
BUS:B<x>:FLEXray:SOUrce
This command sets or queries the Flexray bus data s ource for the specified bus
when the signal type is BDIFFBP or BM. The bus number is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x
>:FLEXray:SOUrce {CH<x>|MATH<x>|REF<x >}
BUS:B<x>:FLEXray:SOUrce?
Arguments
Arguments are the available FlexRay sources.
Examp
les
BUS:B1:FLEXRAY:SOUrce MATH4 sets the FlexRay source to Math 4.
BUS:B1:FLEXRAY:SOUrce? might return :BUS:B1:FLEXRAY:SOURCE CH1,
indicating the s
ource is channel 1.
BUS:B<x>:FLEXray:SOUrce:TXRX
This command sets or queries the FlexRay TxRx data source for the specified bus
when the signal type is TXRX. The bus is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:FLEXray:SOUrce:T XRX
{CH<x>|CH<x>_D<x>|MATH<x> |REF<x>|REF<x>_D<x>}
Arguments
Arguments are the available sources.
2-142 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English