Commands listed in alphabetical order
MATH:MATH2:LA
BEL:YPOS?
might return :MATH:MATH2:LABEL:YPOS 0,
indicating that the waveform label for the Math 2 waveform is currently located at
the baseline of the waveform.
MATH:MATH<x
>:SOUrce<x>
This command sets or queries the specified math source. The source in the
command can be either 1 or 2. This command sets the Basic Math components in
the user in
terface, with two sources and a function. You would also need to set the
math type to Basic to see the change in the user interface but this will not effect
the programmable interface. The m ath waveform and source are specified by x.
Group
Math
Syntax
MATH:MATH<x>:SOUrce<x> {CH<x>|MATH<x>| REF<x>}
Related Commands
MATH:MATH<x>:TYPe, MATH:MATH<x>:FUNCtion
Arguments
Arguments are possible math sources. SOURCE1 and SOURCE2 areforusewhen
the
MATH:MATH<x>:TYPE is BASIC.
Examples
MATH:MATH2:SOURCE1 CH1 sets the first source of m ath 2 to Channel 1.
MATH:MATH3:SOURCE2? might return :MATH:MATH3:SOURCE2 REF3
indicating the second source of Math 3 is Ref 3.
MATH:MATH<x>:SPECTral:HORZ
This command sets or queries the horizontal display scale of the spectral math
waveform. The math waveform is specifi ed by x.
Group
Math
Syntax
MATH:MATH<x>:SPECTral:HOR Z {LOG|LINEAr}
Arguments
LINEAr sets the SpectralMag units to linear.
LOG sets the SpectralMag units to log.
2-372 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
