To Next Page

To Previous Page

Commands listed in alphabetical order

Group

Bus

Syntax

BUS:B<x>:AUDio:WORDSel:SO Urce

{CH<x>|CH<x>_D<x>|MATH<x> |REF<x>|REF<x>_D<x>}

BUS:B<x>:AUDio:WORDSel:SO Urce?

Arguments

CH<x> speciﬁes an analog channel as the word s elect source waveform .

CH<x>_D<x> speciﬁes a digital channel as the word select source waveform.

MATH<x> speciﬁes an math waveform as the word select source waveform .

REF<x> speciﬁes an reference waveform as the word select source waveform .

REF<x>_D<x> speciﬁes a digital reference waveform as the word select source

waveform for the speciﬁed audio bus.

Examples

BUS:B1:AUDIO:WORDSEL:SOUR CE CH1 sets CH1 as the word select source.

BUS:B1:AUDIO:WORDSEL:SOUR CE CH2_D3 sets D3 of FlexChannel 2 as the

word select source.

BUS:B1:AUDIO:WORDSEL:SOUR CE? might r eturn

:BUS:B1:AUDIO:WORDSEL:SOU RCE CH2 indicating that the word select source

is set to CH2.

BUS:B<x>:AUDio:WORDSel:THReshold

This command sets or queries the audio word select source threshold f

or the

speciﬁed bus. The bus is speciﬁed by x.

Conditions

Requires option S R-AUDIO.

Group

Bus

Syntax

BUS:B<x>:AUDio:WORDSel:TH Reshold <NR3>

BUS:B<x>:AUDio:WORDSel:TH Reshold?

Arguments

<NR3> is the audio word select source threshold for the speciﬁed bus.

Examples

BUS:B4:AUDIO:WORDSEL:THRE SHOLD 300.0E-3 sets the Bus 4 audio word

select source threshold to 300 mV.

2-126 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54