To Next Page

To Previous Page

Commands listed in alphabetical order

Examples

BUS:B1:FLEXRA

Y:BITRate RATE2M

sets the bit rate to 2 Mb.

BUS:B1:FLEXRAY:BITRate? might return :B US:B1:FLEXRAY:BI TRATE

RATE10M

, indicating the bit rate is 10 Mb.

BUS:B<x>:FLEXray:BITRate:CUSTom

This command sets or queries the FlexRay custom bit rate for the speciﬁed bus.

The bus is speciﬁed by x.

Conditions

Requires option SR-AUTO.

Group

Bus

Syntax

BUS:B<x>:FLEXray:BITRate: CUSTom <NR1>

BUS:B<x>:FLEXray:BITRate: CUSTom?

Arguments

<NR1> is the FlexRay custom bit rate for the speciﬁed bus.

Examples

BUS:B1:FLEXray:BITRate:CU STom 10000000 sets the bit rate to 10,000,000.

BUS:B1:FLEXray:BITRate:CU STom? might return

:BUS:B1:FLEXRAY:BITRATE:C USTOM 10000000 indicating the bit rate

is set to 10,000,000.

BUS:B<x>:FLEXray:CHannel

This command sets or queries the FlexRay channel type for the speciﬁed bus. The

bus number is speciﬁed by x.

Conditions

Requires option SR-AUTO.

Group

Bus

Syntax

BUS:B<x>:FLEXray:CHannel {A|B}

BUS:B<x>:FLEXray:CHannel?

Arguments

A speciﬁes the A channel.

B speciﬁes the B channel.

2-140 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54