To Next Page

To Previous Page

Commands listed in alphabetical order

TRIGGER:A:BUS

:B1:LIN:DATA:QUALIFIER?

might return

TRIGGER:A:BUS:B1:LIN:DATA :QUALIFIER EQUAL indicating the data

qualiﬁer is set to equal.

TRIGger:{A|

B}:BUS:B<x>:LIN:DATa:SIZe

This command speciﬁes the length o f the data string in bytes to be used for LIN

trigger. The bus number is speciﬁed by <x>.

Conditions

Requires the SR-AUTO Triggering and Analysis application.

Group

Trigger

Syntax

TRIGger:{A|B}:BUS:B<x>:LI N:DATa:SIZe <NR1>

TRIGger:{A|B}:BUS:B<x>:LI N:DATa:SIZe?

Arguments

<NR1> is the size of the data string in bytes.

Examples

TRIGGER:A:BUS:B1:LIN:DATA :SIZE 8 sets the data size to 8 bytes.

TRIGGER:A:BUS:B1:LIN:DATA :SIZE? might return

TRIGGER:A:BUS:B1:LIN:DATA :SIZE 1 indicating the data size is 1 byte.

TRIGger:{A|B}:BUS:B<x>:LIN:DATa:VALue

This command speciﬁes the binary data string to be used for LIN t

rigger condition

if trigger condition is ID or IDANDDATA. The bus number is speciﬁed by <x>.

Conditions

Requires the SR-AUTO Triggering and Analysis application.

Group

Trigger

Syntax

TRIGger:{A|B}:BUS:B<x>:LI N:DATa:VALue <QString>

TRIGger:{A|B}:BUS:B<x>:LI N:DATa:VALue?

Arguments

<QString> is a quoted string that is the LIN trigger data value.

2-812 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54