To Next Page

To Previous Page

Commands listed in alphabetical order

Arguments

Examples

MEASUrement

:MEAS<x>:SSC:NOMinalfreq

This command sets or queries the user-deﬁned frequency for the measurement

when the measurement type is SSC. The measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:SSC:N OMinalfreq <NR3>

MEASUrement:MEAS<x>:SSC:N OMinalfreq?

Arguments

<NR3> is the user-deﬁned nominal frequency type for SSC conﬁgurations.

Examples

MEASUrement:MEAS1:SSC:NOM inalfreq 2.0E+9 sets the frequency to 2.0

GHz.

MEASUrement:MEAS1:SSC:NOM inalfreq? might return

:MEASUREMENT:MEAS1:SSC:NO MINALFREQ 2.5000E+9 indicating

the f requency is 2.5 GH.

MEASUrement:MEAS<x>:SSC:NOMinalfreq:SELECTIONtype

This command sets or queries the frequency detection type for the measurement

when the measurement type is SSC. The measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:SSC:N OMinalfreq:SELECTIONtype

{AUTO|MANual}

MEASUrement:MEAS<x>:SSC:N OMinalfreq:SELECTIONtype?

Arguments

AUTO automatically sets the detection type.

MANual speciﬁes the manual detection type.

Examples

MEASUrement:MEAS1:SSC:NOM inalfreq:SELECTIONtype AU TO speciﬁes

the auto-detection type.

2-486 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54