Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
VBArs specifies
vertical bar cursors, which measure in horizontal units.
HBArs specifies horizontal bar cursors, which measure in vertical units.
SCREEN specifies to display both horizontal and vertical bar cursors, which
measure the selected waveform in horizontal and vertical units. Use these cursors
to measure anywhere in the waveform display area.
Examples
DISplay:MATHFFTView1:CURSo r:FUNCtion HBARS specifies horizontal bar
cursors, which measure in vertical units.
DISplay:MATHFFTView1:CURSo r:FUNCtion? might return specifies
horizontal bar cursors, which measure in vertical units. indicating the display the
paired cursors in YT display format for measuring waveform amplitude and time.
DISplay:MATHFFTView<x>:CURSor:HBArs:APOSition
This command sets or returns the vertical cursor A position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CUR Sor:HBArs:APOSition <NR3>
DISplay:MATHFFTView<x>:CUR Sor:HBArs:APOSition?
Arguments
<NR3> is the cursor position of the speci fied cursor in the s pecified view.
Examples
DISplay:MATHFFTView1:CURSo r:HBArs:APOSition 50.0e-3 sets the
position to 50 mV.
DISplay:MATHFFTView1:CURSo r:HBArs:APOSition? might return
:DISPLAY:MATHFFTVIEW1:CURS OR:HBARS:APOSITION 9.91E+ 37
indicating the position is 9.91E+37.
DISplay:MATHFFTView<x>:CURSor:HBArs:AUNIts? (Query Only)
This command queries cursor A vertical units of the specified cursor in the
specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CUR Sor:HBArs:AUNIts?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-235

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English