To Next Page

To Previous Page

Commands listed in alphabetical order

TRIGger:A:TIM

EOut:LOGICQUALification?

might include

:TRIGGER:A:TIMEOUT:LOGICQ UALIFICATION OFF indicating that logic

qualiﬁcation is off.

TRIGger:{A|

B}:TIMEOut:POLarity

When triggering using the TIMEOut trigger type, this commands speciﬁes the

polarity to be used.

Group

Trigger

Syntax

TRIGger:{A|B}:TIMEOut:POL arity {STAYSHigh|STAYSLow |EITher}

TRIGger:{A|B}:TIMEOut:POL arity?

Related Commands

TRIGger:{A|B}:TIMEOut:SOUrce

TRIGger:{A|B}:TIMEOut:TIMe

Arguments

STAYSHigh — Trigger when the signal stays high during the timeout time

speciﬁed by the command TRIGger:{A|B}:TIMEOut:TIMe.

STAYSLow — Trigger when the signal stays low during the timeout time

speciﬁed by the command TRIGger:{A|B}:TIMEOut:TIMe.

EITher — Trigger when the signal is either high or low during the timeout time

speciﬁed by the command TRIGger:{A|B}:TIMEOut:TIMe.

Examples

TRIGger:A:TIMEOut:POLarit y STAYSHigh speciﬁes to trigger when the

signal stays high during the timeout time when triggering using the TIMEOut

trigger type.

TRIGger:A:TIMEOut:POLarit y? might return EITHER, indicating that the

signal stays either high or low during the timeout time.

TRIGger:{A|B}:TIMEOut:SOUrce

When triggering using the TIMEOut trigger type, this command speciﬁes the

source. The available sources are live channels and digital channels. The default

is channel 1. The timeout trigger type is selected using TRIGger:{A|B}:TYPe

TIMEOut.

Group

Trigger

2-866 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54