Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
DISplay:WAVEV
iew1:CH1:VERTical:SCAle?
might return
:DISPLAY:WAVEVIEW1:CH1:VER TICAL:SCALE 200.0000E-3 indicating the
scale is 200 mV per division.
DISplay:WAV
EView<x>:CH<x>_DALL:STATE
This command sets or queries the display state of the specified digital channel in
the specified waveview.
Group
Display Control
Syntax
DISplay:WAVEView<x>:CH<x>_ DALL:STATE {<NR1>|OFF|ON}
DISplay:WAVEView<x>:CH<x>_ DALL:STATE?
Arguments
<NR1> = 0 disables the display of the specified channels on the specified
waveview; any other v alue turns this feature on.
OFF disables the display of the specified channels on the specified waveview.
ON enables the display of the specified channels on the specified waveview.
Examples
DISplay:WAVEView1:CH1_DALL :STATE ON enables the display of the
specified channels on the specified waveview.
DISplay:WAVEView1:CH1_DALL :STATE? might return
:DISPLAY:WAVEVIEW1:CH1_DAL L:STATE 0 indicating specified
digital channels in the specified waveview are off.
DISplay:WAVEView<x>:CH<x>_DALL:VERTical:POSition
This command sets or queries the vertical position o f the specified digital channel
in the specified waveview in divisions. The position ranges from 5.0 to -5.0
divisions.
Group
Display Control
Syntax
DISplay:WAVEView<x>:CH<x>_ DALL:VERTical:POSition <N R3>
DISplay:WAVEView<x>:CH<x>_ DALL:VERTical:POSition?
Arguments
<NR3> is the vertical position of the sp
ecified digital channel in the specified
waveview in divisions.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-285

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English