Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
MEASUrement:
REFLevels:PERCent:FALLLow
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the mid reference level of the falling edge
when the meas
urement's ref level method is set to percent.
Group
Measurement
Syntax
MEASUrement:REFLevels:PERC ent:FALLLow <NR3>
MEASUrement:REFLevels:PERC ent:FALLLow?
Arguments
<NR3> is the percentage used to calculate the mid reference level of the falling
edge.
Examples
MEASUrement:REFLevels:PERC ent:FALLLow 10 sets the low reference level
to 10%.
MEASUrement:REFLevels:PERC ent:FALLLow? might return
:MEASUREMENT:REFLEVELS:PER CENT:FALLLOW 20.0000 indicating the low
reference level is 20%.
MEASUrement:REFLevels:PERCent:FALLMid
This command sets or queries the percentage
(where 100% is equal to TOP and
0% is equal to BASE) used to calculate the mid reference level of the falling edge
when the measurement's ref level method is set to percent.
Group
Measurement
Syntax
MEASUrement:REFLevels:PERC ent:FALLMid <NR3>
MEASUrement:REFLevels:PERC ent:FALLMid?
Arguments
<NR3> is the percentage used to calculate the mid reference level of the falling
edge
Examples
MEASUrement:REFLevels:PERC ent:FALLMid 55 sets the mid reference
level to 55%.
MEASUrement:REFLevels:PERC ent:FALLMid? might return
:MEASUREMENT:REFLEVELS:PER CENT:FALLMID 50.0000 indicating the mid
reference level is 50%.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-503

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English