To Next Page

To Previous Page

Commands listed in alphabetical order

Examples

BUS:B1:PARall

el:BIT1SOUrce CH1

sets the bit 1 source to channel 1.

BUS:B1:PARallel:BIT1SOUrce ? might return

:BUS:B1:PARA

LLEL:BIT1SOURCE CH1_D0

indicating the bit1 source is

CH1_D0.

BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold

This command sets or queries the speciﬁed bit source threshold for the speciﬁed

parallel bus. The bus is speciﬁed by x. The bit is speciﬁed by n a nd is an integer

in the range of 1 to 64.

Group

Bus

Syntax

BUS:B<x>:PARallel:BIT<n>SO Urce:THReshold <NR3>

Related Commands

BUS:B<x>:PARallel:BIT<n>SOUrce

Arguments

<NR3> is the speciﬁed bit source threshold for the speciﬁed parallel bus.

Examples

BUS:B3:PARALLEL:BIT2SOURCE :THRESHOLD 1.0 sets the threshold of bit

source 2 of parallel Bus 3 to 1.0 V.

BUS:B1:PARALLEL:BIT4SOURCE :THRESHOLD? might return

:BUS:B1:PARALLEL:BIT4SOURC E:THRESHOLD 250.00000E-3 indicates the

threshold of bit source 4 of parallel Bus 1 is currently set to 250.0 mV.

BUS:B<x>:PARallel:CLOCk:EDGE

This command sets or queries the clock edge for the parallel bus. The bus is

speciﬁed by x.

Group

Bus

Syntax

BUS:B<x>:PARallel:CLOCk:ED GE {FALLING|RISING|EITHER}

BUS:B<x>:PARallel:CLOCk:ED GE?

Related Commands

BUS:B<x>:PARallel:CLOCkSOUrce,

MSO54, MSO56, MSO58, MSO58LP Programmer 2-161

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54