Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Conditions
Requires optio
nSR-AERO.
Group
Bus
Syntax
BUS:B<x>:MIL1553B:THRESHol d <NR3>
BUS:B<x>:MIL1553B:THRESHol d
Related Commands
BUS:B<x>:MIL1553B:SOUrce
Arguments
<NR3> is the MIL-STD-1553 upper threshold for the specified bus.
Examples
BUS:B3:MIL1553B:THRESHOLD 2.5 sets the Bus 3 MIL-STD-1553 upper
threshold to 2.5 V.
BUS:B2:MIL1553B:THRESHOLD? might return
:BUS:B2:MIL1553B:THRESHOLD 500.0000E-3 indicating the Bu
s2
MIL-STD-1553 upper threshold is set to 500 mV.
BUS:B<x>:PARallel:ALLTHResholds
This command sets or queries a threshold value for sources for the parallel
bus. Use the BUS:B<x>:PARallel:ALLTHResholds:APPly command to set the
thresholds to this value. The bus is specified by x.
Group
Bus
Syntax
BUS:B<x>:PARallel:ALLTHRes holds <NR3>
Related Commands
BUS:B<x>:PARallel:ALLTHResholds:APPly
Arguments
<NR3> is the source threshold.
Examples
BUS:B4:PARALLEL:ALLTHRESHO LDS 1.0 sets the threshold of all the sources in
parallel Bus 4 to 1.0 V.
BUS:B3:PARALLEL:ALLTHRESHO LDS? might return
BUS:B3:PARALLEL:ALLTHRESHO LDS 500.00000E-3 indicates the threshold for
all sources in parallel Bus 3 is currently set to 500.0 mV.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-159

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English