Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Syntax
PLOT:PLOT<x>:
LABel:COLor <QString>
Arguments
<QString> is the label color. The default color is specified by a quoted empty
string, and is the only available color.
Examples
PLOT:PLOT2:LABel:COLor "`" sets the plot color to the default color.
PLOT:PLOT2:LABel:COLor? might return :PLOT:PLO T2:LABEL:COLOR ""
indicating the plot color is the default color.
PLOT:PLOT<x>:LABel:FONT:BOLD
This command sets or queries the bold state of the specified trend label. This
command/query only applies to Time Trend plots.
Group
Plot
Syntax
PLOT:PLOT<x>:LABel:FONT:B OLD {<NR1>|OFF|ON}
Arguments
<NR1> = 0 disables bold font; any other value turns this feature on.
OFF disables bold font.
ON enables bold font.
Examples
PLOT:PLOT1:LABEL:FONT:BOL D 1 sets the label to a bold font.
PLOT:PLOT1:LABEL:FONT:BOL D?
might return
:PLOT:PLOT1:LABEL:FONT:BO LD 1 indicating the label is bold.
PLOT:PLOT<x>:LABel:FONT:ITALic
This command sets or queries t
he italic state of the specified trend label. This
command/query only applies to Time Trend plots.
Group
Plot
Syntax
PLOT:PLOT<x>:LABel:FONT:I TALic {<NR1>|OFF|ON}
2-522 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English