Benelli TNT125 - Suspension System

★If the level is lower than the lower limit, add the
brake fluid in the reservoir until the level reaches the
high fluid level line [A].
Remark
○Brake fluid may damage the painted surfaces or
plastic parts. Therefore, wrap the absorbent paper
around the pump and clear the spilled brake fluid
immediately.
●
Check the brake fluid cylinder diaphragm on the
cover.
★If there is any damage/wear, please replace the brake
fluid cylinder diaphragm
●Check whether the level of the brake fluid in the rear
brake fluid reservoir [A] is between the upper limit [C]
and the lower limit [B].
★If the level is below the lower limit, add the brake
fluid to the reservoir until the level reaches the high
fluid level line [B].
●Check the brake fluid diaphragm on the reservoir.
★If there is any damage/wear, please replace the brake
fluid diaphragm.
- 74 -