Grandstream Networks UCM6510 - Table 21: Auto Provision Settings; Figure 59: Auto Provision Settings

P a g e | 109
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 59: Auto Provision Settings
Table 21: Auto Provision Settings
Enable Zero Config
Enable or disable the Zero Config feature on the PBX. The default setting
is enabled.
Enable Automatic
Configuration Assignment
By default, this is disabled. If disabled, when SIP device boots up, the
UCM6510 will only send the configuration path to the device when you
have any manual configuration on the device. This manual configuration
includes:
 Any configuration under BASIC and CUSTOM page of the device in
Zero Config page
 If any global or model template (expect for the default template) is
selected for the assigned device in Zero Config page.
Note:
When disabled, SIP devices can still be provisioned by manually sending
NOTIFY from the UCM6510 which will include the XML config file URL for
the SIP device to download.