Grandstream Networks UCM6510 User Manual

P a g e | 325
UCM6510 IP PBX User Manual
Version 1.0.20.31
4. Go to UCM6510 Web GUIExtension/TrunkInbound Routes page. Create a new inbound route
and set the default destination to the Fax extension.
Figure 212: Inbound Route to Fax Extension
5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number
will be converted to PDF file and sent to the Email address fax@domain.local as attachment.
Fax Sending
The UCM6510 supports sending Fax via Web GUI access. This feature can be found on Web GUIValue-
added FeaturesFax Sending page. In order to send fax, pre-setup for analog trunk and outbound route
is required.
Note: Only A3, A4 and B4 paper sizes are supported for the Fax Sending.
After making sure analog trunk or VoIP Trunk is setup properly and UCM6510 can reach out to PSTN
numbers via the trunk, on Fax Sending page, enter the fax number and upload the file to be faxed. Then
click on “Send” to start. The progress of sending fax will be displayed in Web GUI. Users can also view the
sending history is in the same web page.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English