Grandstream Networks UCM6510 User Manual

P a g e | 414
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 278: Create New Wakeup Service – User Portal
3. Configure the Name, Prompt, Date and Time for the wakeup call
4. Click and to apply the changes. A wakeup service entry is created. The
UCM will send a wakeup call at the scheduled date and time.
Wakeup Service using Feature Code
 Log into the UCM admin portal.
 Enable “Wakeup Service” from the WebGUI under the Call FeaturesFeature CodesFeature
Codes page.
Figure 279: Wakeup Service Feature Code
 Click and to apply the changes.
 Dial the Wakeup Service feature code (*36 by default) to access to the UCM wakeup service.
 Users have the choice to set a wakeup service for tomorrow or specify another day when adding
a wakeup service.
 A wakeup service entry is created. The UCM will send a wakeup call at the scheduled date and
time.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English