Grandstream Networks UCM6510 - Vtigercrm; Figure 255: CRM User Settings

P a g e | 395
UCM6510 IP PBX User Manual
Version 1.0.20.31
Contact Lookups
Select from the “Available” list of lookups and press to
select where the UCM can perform the lookups on the CRM tables,
Leads, Accounts, and Contacts.
Once settings on admin access are configured:
2. Click on and .
3. Logout from admin access.
4. Login to the UCM as user and navigate under “User PortalValue-added FeatureCRM User
Settings”.
Click on “Enable CRM” and enter the username/password associated with the CRM account then click on
and . The status will change from “Logged Out” to “Logged In”. User can start then
using SugarCRM features.
Figure 255: CRM User Settings
vTigerCRM
Configuration page of the vTigerCRM can be accessed via admin login, on the UCM Web GUIValue-
added FeaturesCRM.