Grandstream Networks UCM6510 - Ipvideotalk Meetings; Figure 156: IPVT SIP Trunk Page; Figure 157 - Peer Trunk to IPVT

P a g e | 264
UCM6510 IP PBX User Manual
Version 1.0.20.31
IPVIDEOTALK MEETINGS
UCM extensions can now dial into IPVT (IPVideoTalk) meetings by creating a peer trunk to an IPVT server.
However, users must make sure that the IPVT server they are peering to also has a peer trunk to their UCM
configured. This setting can be found in Admin CenterSIP Trunk Configuration.
Figure 156: IPVT SIP Trunk page
Next, users must create a peer trunk on the UCM to the IPVT server. Enter one of the following addresses
based on the desired connection protocol:
 TCP: pro.ipvideotalk.com:20000
 TLS: pro.ipvideotalk.com:20001
Figure 157 - Peer Trunk to IPVT
Make sure that the Transport field is either “TCP” or “TLS”. Save and apply changes to create the trunk.