Grandstream Networks UCM6510 - DHCP Client List; Figure 11: UCM6510 Network Interface Method: Dual; Figure 12: DHCP Client List

P a g e | 66
UCM6510 IP PBX User Manual
Version 1.0.20.31
 Method: Dual
Both WAN port and LAN port are used for uplink connection. WAN port will be mapped to LAN 1
interface; LAN port will be mapped to LAN 2 interface. Users will need assign LAN 1 or LAN 2 as the
default interface in option “Default Interface” and configure “Gateway IP” if static IP is used for this
interface.
Figure 11: UCM6510 Network Interface Method: Dual
DHCP Client List
This page lists all the detected devices on the LAN and the IP addresses that were provided to them.
Additionally, users can manually link a MAC address to an IP address.
When devices receive IP addresses from the UCM's DHCP server, they will be listed in the System
SettingsNetwork SettingsDHCP Client List page as shown below:
Figure 12: DHCP Client List