P a g e | 141
UCM6510 IP PBX User Manual
Version 1.0.20.31
Click on the tab to view or edit options belonging to that category. The configuration parameters are as
follows.
Table 31: SIP Extension Configuration Parameters – Basic Settings
The extension number associated with the user.
Note: This filed supports (+) sign.
Configure the CallerID Number that would be applied for outbound calls
from this user.
Note: The ability to manipulate your outbound Caller ID may be limited by
your VoIP provider.
Assign permission level to the user. The available permissions are
“Internal”, “Local”, “National” and “International” from the lowest level to
the highest level. The default setting is “Internal”.
Note: Users need to have the same level as or higher level than an
outbound rule’s privilege to make outbound calls using this rule.
Configure the password for the user. A random secure password will be
automatically generated. It is recommended to use this password for
security purpose.
Configure the authentication ID for the user. If not configured, the
extension number will be used for authentication.
Note: This filed supports (+) sign.
Configure Voicemail. There are three valid options and the default option
is "Enable Local Voicemail".
Disable Voicemail: Disable Voicemail.
Enable Local Voicemail: Enable voicemail for the user.
Enable Remote Voicemail: Forward the notify message from
remote voicemail system for the user, and the local voicemail will
be disabled. Note: Remote voicemail feature is used only for
Infomatec (Brazil).
Configure the password to access the extension's voicemail. A randomly
generated password is used by default and is highly recommended for
security. Only digits are supported.
Skip Voicemail Password
Verification
If enabled, users can skip password verification when dialing in via the My
Voicemail feature code. This option is disabled by default.
If enabled, the voicemail will be attached to the email notification that is
sent when a voicemail is received. Note: When set to "Default", the global
settings in Call FeaturesVoicemailVoicemail Email Settings will be
used.