Grandstream Networks UCM6510 User Manual

P a g e | 142
UCM6510 IP PBX User Manual
Version 1.0.20.31
Keep Voicemail after
Emailing
Configure whether or not to retain the voicemail in local storage after
sending the voicemail attachment in the email notification.
Enable Keep-alive
If enabled, empty SDP packet will be sent to the SIP server periodically to
keep the NAT port open. The default setting is “Yes”.
Keep-alive Frequency
Configure the Keep-alive interval (in seconds) to check if the host is up.
The default setting is 60 seconds.
Disable This Extension
If selected, this extension will be disabled on the UCM6510.
Note: The disabled extension still exists on the PBX but cannot be used
on the end device.
User Settings
First Name
Configure the user's first name. This field supports alphanumeric
characters, underscores (_), and periods.
Last Name
Configures the user's last name. This field supports alphanumeric
characters, underscores (_), and periods.
Email Address
Configure the user's email address. Email notifications will be sent to this
address.
User Password
Configure the password for user portal access. A random password is
automatically generated by default and is highly recommended for
security.
Language
Select the voice prompt language that will be used for this extension. By
default, the selected voice prompt language under PBX SettingsVoice
PromptLanguage Settings will be used. To add more supported
languages, please download the voice prompt language packages in the
same page.
Concurrent Registrations
The maximum allowed number of endpoint registrations to this extension.
Default value is 1.
Mobile Phone Number
Configure a phone number for the extension. Users can dial the Direct Dial
Mobile Phone Prefix feature code (*88 by default) + extension number to
directly dial this number. Example: Dial *881000 to call the mobile number
associated with extension 1000.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English