P a g e | 338
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 221: Emergency Number Configuration
The table below gives more description of the configuration parameters when creating emergency numbers.
Table 101: Emergency Numbers Parameters
Configure the name of the emergency call.
For example, "emergency911","emergency211" and etc.
Config the emergency service number. For example,"911","211" and etc.
Select the emergency level of the number. Level "3" means the most
urgent.
If this option is not enabled, when the lines of trunks which the coming
emergency call routes by are completely occupied, the line-grabbing
function will automatically cut off a line from all busy lines so that the
coming emergency call can seize it for dialing out. This option is not
enabled by default.
Configures a custom prompt that will be played to the notified extensions
when an emergency call is made. The file can be uploaded from the page
"Custom Prompt". Click "Upload Audio File" to add a custom prompt.
To Next Page
Loading...
Need help?
General
