Grandstream Networks UCM6510 User Manual

P a g e | 127
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 69: Template Management
Upload Model Template Package
In case the UCM6510 is placed in the private network and Internet access is restricted, users will not be
able to get packages by downloading and installing from the remote server. Model template packages can
be manually uploaded to the UCM. Please contact Grandstream customer support if the model package is
needed for manual uploading.
Figure 70: Upload Model Template Manually
Device Configuration
On Web GUI, page Value-added FeaturesZero ConfigZero Config, users could create new device,
delete existing device(s), make special configuration for a single device, or send NOTIFY to existing
device(s).
Create New Device
Besides configuring the device after the device is discovered, users could also directly create a new device
and configure basic settings before the device is discovered by the UCM6510. Once the device is plugged
in, it can then be discovered and provisioned. This gives the system administrator adequate time to set up
each device beforehand.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English