P a g e | 376
UCM6510 IP PBX User Manual
Version 1.0.20.31
Configure the payload type for H.264. The default setting is 114.
Configure the payload type for H.263+. The default setting is 100 103.
Configure the payload type for VP8. The default setting is 108.
Configure the payload type for Main Video FEC, The default is 120
Configure the payload type for RTP FECC, The default is 125
Configure the payload type for RTX, The default is 124
PBX Settings/NAS
UCM supports saving call recordings and backing up/restoring system backups to a NAS server. The
following options are available:
Table 113: NAS Settings
Toggles the NAS recording functionality.
Configure the Domain or IP address of the NAS server.
Note: Currently, only IP addresses are supported in the Host/IP field.
Specify the name of the shared folder.
Specify the account username to access the NAS server.
Configure the account password to access the NAS server.
If configured correctly, the Status field will show “Mounted”, and the newly
added NAS server will be shown on the Mounted Netdisk List. Additionally, the
NAS will appear as a selectable storage option in the PBX Settings->Recording
Storage page and CDRRecording Files page.
To Next Page
Loading...
Need help?
General
