Grandstream Networks UCM6510 - Paging;Intercom Group Settings; Configure a Scheduled Paging;Intercom; Figure 185: Page;Intercom Group Settings; Figure 186: Schedule Paging;Intercom Page

P a g e | 299
UCM6510 IP PBX User Manual
Version 1.0.20.31
Paging/Intercom Group Settings
Figure 185: Page/Intercom Group Settings
The UCM6510 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81 and
the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to Web GUICall FeaturesFeature Codes
directly.
Configure a Scheduled Paging/Intercom
Users can schedule paging/intercom calls by using the Schedule Paging/Intercom page. To schedule, click
the Add button on the new page and configure the caller, the group to use, and the time to call out.
Figure 186: Schedule Paging/Intercom page