Grandstream Networks UCM6510 User Manual

P a g e | 359
UCM6510 IP PBX User Manual
Version 1.0.20.31
Dynamic Agent Logout
 Default Code: *85
 Use this code to logout the dynamic agent from all queues.
Voicemail Group Access Code
Call voicemail group access code to access group voicemail. If
password is required, enter password followed by pound "#" key.
The UCM6510 also allows user to enable / disable specific feature code by one click. As shown below:
Figure 234: Enable/Disable Feature codes
Parking Lot
User can create parking lots and their related slots under Web GUI Call Features Parking Lot. In the
Parking Lot page, users can create lots of their own. This allows different groups within an organization to
have their own parking lots instead of sharing one large parking lot with others. While creating a new parking
lot, users can assign it a range that they think is appropriate for the group that will use the parking lot.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English