Grandstream Networks UCM6510 User Manual

P a g e | 358
UCM6510 IP PBX User Manual
Version 1.0.20.31
Direct Dial Mobile Phone Prefix
 Default Code: *88
 If you have the permission to call mobile phone number, use
this prefix plus the extension number can dial the mobile phone
number of this extension directly.
Call Completion Request
 Default Code: *11
 This code is for the user who wants to use Call Completion.
Call Completion Cancel
 Default Code: *12
 This code is to cancel Call Completion request.
Enable Spy
Check this box to enable spy feature codes. Disabled by default.
Listen Spy
 Default Code: *54 (“Enable Spy” needs to be checked)
 This is the feature code to listen in on a call to monitor
performance. Monitor’s line will be muted, and neither party will
hear from the monitor’s extension.
Whisper Spy
 Default Code: *55 (“Enable Spy” needs to be checked)
 This is the feature code to speak to one side of the call (for
example, whisper to employees to help them handle a call).
Only one side will be able to hear from the monitor’s extension.
Barge Spy
 Default Code: *56 (“Enable Spy” needs to be checked)
 This is the feature code to join in on the call to assist both
parties.
Wakeup Service
 Default Code: *36
 Dial this code to access UCM wakeup service, you can add,
update, activate or deactivate wakeup service.
PMS Wakeup Service
 Default Code: *35
 Dial this code to access UCM PMS wakeup service, you can
add, update, activate or deactivate PMS wakeup service.
Update PMS Room Status
 Default Code: *23
 Use this code with maid code to update PMS room status.
Choose the status to set after hearing the prompt, for example:
for maid 001 dial *23001 and then 1 after hearing the prompt.
Presence Status
 Dial this code to set the presence status of the extension.
 Possible options are:
1:"unavailable"
2:"available"
3:"away"
4:"chat
5:"dnd
6:"userdef"

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English