Grandstream Networks UCM6510 - Table 156: Network Upgrade Configuration; Figure 324: Network Upgrade

P a g e | 460
UCM6510 IP PBX User Manual
Version 1.0.20.31
Examples of valid URLs:
firmware.grandstream.com/BETA
The upgrading configuration can be accessed via Web GUIMaintenanceUpgrade.
Figure 324: Network Upgrade
Table 156: Network Upgrade Configuration
Upgrade Via
Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Define the server path for the firmware server.
Firmware File Prefix
If configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the UCM6510.
Firmware File Suffix
If configured, only the firmware with the matching encrypted postfix will be
downloaded and flashed into the UCM6510.
HTTP/HTTPS Username
The username for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Please follow the steps below to upgrade the firmware remotely.
1. Enter the firmware server path under Web GUIMaintenanceUpgrade.