Grandstream Networks UCM6510 - HTTPS API (Old); Table 125: API Configuration Parameters (Old)

P a g e | 389
UCM6510 IP PBX User Manual
Version 1.0.20.31
listAccount
updateInboundRoute
getPaginggroup
getSIPAccount
deleteInboundRoute
updatePaginggroup
updateSIPAccount
playPromptByOrg
deletePaginggroup
listVoIPTrunk
listBridgedChannels
MulticastPaging
addSIPTrunk
listUnBridgedChannels
MulticastPagingHangup
getSIPTrunk
Hangup
listIVR
updateSIPTrunk
Callbarge
addIVR
deleteSIPTrunk
listQueue
getIVR
listOutboundRoute
getQueue
updateIVR
addOutboundRoute
updateQueue
deleteIVR
getOutboundRoute
addQueue
Cdrapi
updateOutboundRoute
deleteQueue
Recapi
deleteOutboundRoute
loginLogoffQueueAgent
Pmsapi
listInboundRoute
pauseUnpauseQueueAgent
Queueapi
listDigitalTrunk
listAnalogTrunk
getAnalogTrunk
deleteAnalogTrunk
updateAnalogTrunk
addAnalogTrunk
addSLATrunk
updateSLATrunk
addDigitalTrunk
updateDigitalTrunk
deletedigitalTrunk
getDigitalTrunk
For more details, please refer to online how-to guide available in our website.
HTTPS API (Old)
Table 125: API Configuration Parameters (Old)
HTTPS API Settings (Old)
Basic Settings
Enable
Enable/Disable API. The default setting is disabled.
TLS Bind Address
Configure the IP address for TLS server to bind to. "0.0.0.0" means binding to all
interfaces. The port number is optional, and the default port number is 8443. The IP
address must match the common name (host name) in the certificate so that the
TLS socket will not bind to multiple IP addresses.
The default setting is 0.0.0.0:8443.