Grandstream Networks UCM6510 - Configure 1-Way Paging; Table 87: 1-Way Paging Configuration Parameters; Figure 182: 1-Way Paging

P a g e | 295
UCM6510 IP PBX User Manual
Version 1.0.20.31
Type
Select "2-way Intercom".
Extension
Configure the paging/intercom group extension.
Replace Display Name
If enabled, the UCM will replace the caller display name with Paging/Intercom
name.
Maximum Call Duration
Specify the maximum call duration in seconds. The default value 0 means no
limit.
Custom Prompt
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Users can now directly upload custom prompts from this page. They do
not need to be redirected anymore.
Members
Select available users from the left side to the paging/intercom group member
list on the right.
Paging/Intercom
Whitelist
Select which extensions are allowed to use the paging/intercom feature for this
paging group.
Configure 1-way Paging
Figure 182 : 1-way Paging
Table 87: 1-way Paging Configuration Parameters
Name
Configure paging/intercom group name.