P a g e | 296
UCM6510 IP PBX User Manual
Version 1.0.20.31
Configure the paging/intercom group extension.
If enabled, the UCM will replace the caller display name with Paging/Intercom
name.
Specify the maximum call duration in seconds. The default value 0 means no
limit.
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Users can now directly upload custom prompts from this page. They do
not need to be redirected anymore.
Select available users from the left side to the paging/intercom group member
list on the right.
Paging/Intercom
Whitelist
Select which extensions are allowed to use the paging/intercom feature for this
paging group.
Configure Announcement Paging
Figure 183 : Announcement Paging
Table 88: Announcement Paging Configuration Parameters
Enable/Disable Announcement Paging.
Configure paging/intercom group name.