P a g e | 158
UCM6510 IP PBX User Manual
Version 1.0.20.31
Time Condition for Skip
Trunk Auth
If “Skip Trunk Auth” is set to “By Time”, select a time condition during which
users can skip entering password when making outbound calls.
Configure personal password when making outbound calls via trunk.
If enabled, this extension will be added to LDAP Phonebook PBX list; if
disabled, this extension will be skipped when creating LDAP Phonebook.
Select which Music On Hold playlist to suggest to extension when putting
the active call on hold.
Configure the maximum duration of call-blocking.
Table 42: FXS Extension Configuration Parameters – Specific Time
Click to add Time Condition to configure specific time for this extension.
Batch Add Extensions
Batch Add SIP Extensions
To create multiple SIP extensions quickly, users can select "Batch" for the Select Add Method option during
the extension creation process.
Table 43: Batch Add SIP Extension Parameters
Configure the starting extension number of the batch of extensions to be
added.
Specify the number of extensions to be added. The default setting is 5.
Specify how much to increment each additional extension (e.g., if the value
is 2, the extensions will be 1000, 1002, 1004, etc.). Note: Supports up to 3
characters.
Assign permission level to the user. The available permissions are
“Internal”, “Local”, “National” and “International” from the lowest level to the
highest level. The default setting is “Internal”.
Note: Users need to have the same level as or higher level than an
outbound rule’s privilege in order to make outbound calls using this rule. If
the outbound rule privilege is disabled, this option will not take effect.
Configure Voicemail. There are three valid options and the default option is
"Enable Local Voicemail".
Disable Voicemail: Disable Voicemail.
Enable Local Voicemail: Enable voicemail for the user.
To Next Page
Loading...
Need help?
General
