Grandstream Networks UCM6510 User Manual

P a g e | 134
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 77: Modify Selected Devices—Different Models
Warning:
Perform batch operation will override all the configurations made when editing a single device. For
example, if the user configures a GXP2140 to use template “TempA” in Global Templates level by
editing a single device and then selects several devices including that GXP2140 to batch modify
devices selecting “TempB” in Global Templates level, the user will see the global templates changed
to “TempB” when viewing the configurations for the GXP2140.
After the above configurations, save the changes and go back to Web GUIValue-added FeaturesZero
ConfigZero Config page. Users could then click on to send NOTIFY to the SIP end point device
and trigger the provisioning process. The device will start downloading the generated configuration file from
the URL contained in the NOTIFY message.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English