Grandstream Networks UCM6510 - Figure 15: UCM6510 Using 802.1 X as Client; Figure 16: UCM6510 Using 802.1 X EAP-MD5

P a g e | 68
UCM6510 IP PBX User Manual
Version 1.0.20.31
802.1X
IEEE 802.1X is an IEEE standard for port-based network access control. It provides an authentication
mechanism to device before the device is allowed to access Internet or other LAN resources. The UCM6510
supports 802.1X as a supplicant/client to be authenticated.
The following diagram and figure show UCM6510 use 802.1X mode “EAP-MD5” on WAN port as client in
the network to access Internet.
Figure 15: UCM6510 using 802.1X as Client
Figure 16: UCM6510 using 802.1X EAP-MD5
The following table shows the configuration parameters for 802.1X on UCM6510. Identity and MD5